GW Instek PEL-2000B Series, User Manual

Page: 126 / 317

PEL-2000B Series User Manual
126
Panel Operation
1. Press the F2 (Range) key repeatedly
until High or Low range is selected.
Range
High
Range
Low
F1 F5
~
F2
The range will be reflected in both the
bottom menu system and the Current
Operation Channel Status panel.
CCDH
main
80V
CH1P
CC Dynamic Low
CC Dynamic High
CC Static Low
CC Static High
CCDL
CCDH
CCL
CCH
Note
Changing the range will only affect the current
(active) channel. Other channels will not be affected
by any changes.
Not all load modules support dual ranges. If only one
range is supported, it is usually high range.
Select CC Dynamic Mode
Background
Constant current mode can be set to dynamic or
static mode. Dynamic mode is used to
automatically set varying load rates.
Ensure the menu is in CC Mode. See page 125.
Configure Configure
Mode
CC
Dynamic
Range
High
Panel Operation
1. Press the F3 key until Dynamic
Range mode is selected.
Dynamic Static
F1 F5
~
F3