GW Instek PEL-2000B Series, User Manual

Page: 125 / 317

OPERATION
125
Select CC Mode
Background
The PEL-2000B series loads operate in four
different modes: Constant Current (CC), Constant
Resistance (CR), Constant Voltage (CV), and
Constant Power (CP).
When a channel is active, the F1 key
can be used to switch between each
operating mode.
F1 F5
~
F1
Mode
CC
Mode
CR
Mode
CV
Mode
CP
Panel Operation
1. Select a channel using the CHAN
button and selector knob.
CHAN
LOCAL
2. Press F1 repeatedly until CC
mode is displayed in the display
panel.
F1 F5
~
F1
Configure Configure
Mode
CC
Dynamic
Range
High
Note
Changing the operating mode will only affect the
current (active) channel. Other channels will not be
affected by any changes.
Select CC Range
Background
Constant current mode can run in high and low
range. Maximum range is dependent on the load
module. Some models are only high range.
Ensure the menu is in CC Mode. See page 125.
Configure Configure
Mode
CC
Dynamic
Range
High