MDO-2000E series User Manual
110
Vertical View (Channel)
This section describes how to set the vertical scale, position, and
coupling mode.
Move Waveform Position Vertically
Panel Operation
1.
To move the waveform up or
down, turn the
vertical position
knob for each channel.
POSITION
PUSH TO
ZERO
2.
As the waveform moves, the vertical position of
the channel indicator appears at the bottom half
of the display.
View or Set the
Vertical Position
3.
Press a channel key. The vertical
position is shown in the
Position /
Set to 0
soft key
.
4.
To change the position, press
Position / Set to 0
to reset the
vertical position or turn the
vertical
position
knob to the desired level.
CH1
POSITION
PUSH TO
ZERO
Run/Stop Mode
The waveform can be moved vertically in both
Run and Stop mode.
All manuals and user guides at all-guides.com