GW Instek GSP-810 User Manual Download Page 34

Page: 34 / 40

GSP-810 User Manual

Appendix 1 - Remote Operation (Standard and Option)

With remote operation, the GSP-810 is capable of communicating with a computer

over the RS-232 port. No setup is required on the GSP-810 to enable the remote

interface. The GSP-810 will monitor the RS-232 port and respond when a PC is

connected.

The PC applications are designed to run on Windows® NT, Windows® 95, or

Windows® 98. The serial port used is selectable and the port setups are handled

automatically by the application. The cable should be a straight through RS-232

cable (not a NULL modem).

To have the application, simply to download the application file from GOODWILL

INSTRUMENT CO., LTD. web site or directly click the following URL:

Two programs are available for use with the GSP-810. The "standard" program

provided with the GSP-810, "GSP810try" provides display of the spectrum trace,

saving and printing of the trace, but no computer control of the GSP-810 settings.

By clicking the “GSP-810 Remote display software”, the GSP810try can be

downloaded.

The optional program "GSP810" which can be downloaded by clicking “GSP-810

Remote control software” provides the same functions as the standard GPS810try,

plus allows you to control the unit from the computer. With the optional “GSP810”

application, a license code is necessary to perform. Please contact us for ordering

the license code.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for GSP-810









































Search results

Summary of Contents for GSP-810

Reviews:

Related manuals for GSP-810

Brands by name

Popular brands

GW Instek GSP-810, User Manual

Search results

Summary of Contents for GSP-810

Reviews:

Related manuals for GSP-810

Brands by name

Popular brands