GW Instek GPE-1326 Series, User Manual

Page: 26 / 49

SETUP
27
Output On/Off
Panel operation
Press the Output key to turn on
all outputs in each channel.
GPE-1326












Push the Output key again to
turn off all outputs. The
OFF
icon will become lit on the LCD
display.
GPE-1326












Automatic output
off
Any of the following actions during output on
automatically turns it off.

Change the operation mode between
independent / series tracking / parallel
tracking

When OVP is activated on a channel (except
CH3 on the GPE-3323)

When the lock function is disabled.

When toggling to remote control
Select CH1/CH2 series or parallel mode
Background /
Connection
When you need to output a higher voltage or
current through the GPE-2323/3323/4323 series
can be connected in series or parallel to achieve it.
When connecting in series, the output voltage is
twice than that of a single channel. When
connecting in parallel, the output current is twice
than that of a single channel. For details, please see
page 38 through to 42.
Panel operation
You can toggle the connection
mode of CH1/ CH2 by using
different combinations of the
mode selection key.
GPE-3323



 
 

 


 

  



 






For the independent mode,
the right key is not pressed
GPE-3323



 
 

 





  



 





www. .com
information@itm.com 1.800.561.8187