19 of 41
11. Trouble shooting
The monitor does not respond after you turn on the system.
•
Check if the
Power Switch
of monitor is turned
on
.
•
Turn off the power and check the monitor’s power cord and signal cable for proper
connection.
The characters on the screen are dim.
•
Refer to the Controls and Adjustments section to adjust the brightness.
The screen is blank.
•
During operation, the monitor screen may automatically turn off as a result of Power
Saving feature. Press any key to see if the screen comes back.
•
Refer to the Controls and Adjustments section to adjust the brightness.
The screen flashes when it’s initialized.
•
Turn off the monitor and turn it on again.
◆
Cleaning
Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth.
This removes dust and other particles that can scratch the screen.
Do not apply pressure to the screen surface when wiping it clean.
Do not pour or spray any liquid directly onto the screen or case of the LCD monitor.
Chemical cleaners have been reported to damage the screen or case of the LCD
monitor.
WARNING : Do not
disassemble the monitor. Contact your dealer if needed.
