•
Very thick slices may require two cycles.
•
When toasting raisin or other fruit breads, remove any loose fruit from the surface of the bread before
placing in the toaster. This will help prevent pieces from falling into the toaster or sticking to the guard
wire in the slot. Fruits stuck inside the toaster or left in the crumb tray are a common cause of toaster
fires.
•
Before toasting bagels, slice each bagel into two equal halves.
•
Single slice toasting; if you are toasting a single slice of bread, set the browning control lighter than
normal. The toaster is designed to heat the whole toasting chamber for two slices. By reducing the
toasting cycle for a single slice it will not be over toasted.
•
Frozen breads; Frozen breads should be toasted using the Defrost cycle.
•
Pastries; Exercise caution when toasting pastries. The filling can become quite hot long before the
surface of the pastry becomes brown.
CLEANING AND STORING
Before attempting any cleaning operation, make sure that the toaster is unplugged from the power supply
and has fully cooled down.
1.
Breadcrumbs will collect in the base of the toaster. To remove them, slide the crumb tray from the base
of the toaster. Clean out the crumbs and slide the crumb tray back into the toaster. NEVER
OPERATE THE TOASTER WITHOUT THE CRUMB TRAY IN POSITION.
2.
To remove lodged bread, turn the toaster upside down and shake.
NEVER INSERT ANY METAL UTENSIL OR TOOL INTO TOASTING SLOTS. IT IS
DANGEROUS AND MAY DAMAGE WORKING PARTS OF THE TOASTER.
3.
To clean the external surfaces, simply wipe over with a clean, soft damp cloth. Should it be necessary,
greasy marks may be removed using mild soap and a cloth dampened with hot water. Avoid all other
types of detergents, cleaners or solvents that might contain chemicals that could damage parts of the
toaster. Thoroughly dry all parts before storing.
ON NO ACCOUNT SHOULD THE TOASTER BE IMMERSED IN ANY LIQUID.
FOR YOUR SAFETY
1.
Always check full toaster operation as detailed above before returning any unit as faulty.
2.
Do not operate the toaster with a damaged cord or plug, or after the unit malfunctions or is damaged in
any way. Return the complete toaster to the place of purchase for in-warranty replacement, or
inspection and repair.
3.
This toaster contains no internal user serviceable parts.
4.
In some products, the replacement of the power cord by the user is not intended. Special tools are
required to replace the cord. Return the complete toaster to the place of purchase for in-warranty
replacement, or inspection and repair.
READ AND SAVE THESE INSTRUCTIONS
