GVA GVA30DF, Instruction Manual, Page: 4 / 7

4
Operation of your Pedestal Fan
Figure 1
Protruding indents
Plastic nut securing
safety grille
Your new 30cm Desk Fan has been shipped un-assembled to reduce wastage of packing
material, paper cartons and weight. Please keep these instruction handy as they outline
how to simply and easily assemble the fan.
1. After removing everything from the carton, locate the motor unit and spin the plastic
nut in an anti-clockwise direction to undo. (Figure 1)
2. Locate the rear safety grill and position over the protruding indents. The safety grill
will only fit one way over the protruding intents with the handle facing up. Replace the
plastic nut and tighten, taking care to not over-tighten.
3. Locate the fan blades and locking nut. Position the blades over the metal spindle
of the motor and line up the groove on the blades with the “T” protruding from the
metal spindle. After the blade has been put on, tighten the locking nut in the reverse
direction, taking care to not overtighten. As the bolt is secured in the opposite direction
the spinning blades, the locking nut will tighten gradually with the operation of the
appliance. (Figure 2.)
Locking nut
Fan Blade
Figure 2