GVA G40PFW17, Instruction Manual

Page: 7 / 12

7
Place the back safety grille into position.
Ensure the safety grille fits onto the locating lugs (Fig. 1). If this is done correctly. The hole for fixing
screw and nut will be at the bottom.
Fix the safety grille into position by replacing the locking nut tightly by hand (Fig. 1). Do not force the
locking nut.
Fig. 1 - Locating lugs and locking nut
Locking nut
(Fig.1)
The groove in the centre of the fan blade aligns with a T-bar on the motor spindle to ensure correct
positioning.
Fix the blade into place by gently hand tightening the spinner (Fig. 2) anticlockwise onto the end of the
motor spindle. The spinner is self-tightening; do not force it. (Fig. 2 Spinner tightens anti-clockwise)
(Fig.2)
Lift out all locking clips on the front safety grille. (Fig.3)
(Fig.3)
Place the safety grille into position and secure it by fastening the clips over the outer rim. The screw and
nut at the bottom of the grille must be fitted (Fig. 4).
(Fig. 4)