PIXEL
TW
Architectural Spot and Flood Light
INSTALLATION GUIDE
GVA Lighting, Inc. 2771 Bristol Cir, Oakville, ON L6H 6X5
Tel: + 1 905 569 6044 Email: [email protected]
IG-PIXEL-TW, 2020-08-26
|
Page 3 / 4
gvalighting.com
1.B.
SURFACE MOUNT BRACKET
NOTE
: If installing CLIP MOUNT BRACKET refer to Step 1.A.
Install SURFACE MOUNT BRACKET using M3 Panhead Screws (supplied by others) suitable for the mounting surface.
REQUIRED
HARDWARE:
M3 PANHEAD SCREW
(supplied by others)
2X
2
CABLE
CONNECTIONS
CAUTION Connectors need to be firmly engaged for the snap to work properly. An audible ‘CLICK’ will be heard when snap
is fully inserted. Failure to connect luminaires correctly may result in fixture malfunction or damage.
Identify the input / ouput connectors and engage clips.
INPUT CONNCETOR
OUTPUT CONNCETOR
