GV 6 Quart Backpack Diagram
1.Filter guard A 2. HEPA Filter 3. Filter guard B 4. Motor
5. Thermo-protector 6. Extension cord
（
not included-optional
）
7. Cover latch 8.switch 9.Screws(M3*25) 10. Screws(M3*12)
11.Upper part of switch box 12. Connector terminal and insulator
13. Power supply cords and cord sets
14. Wire connector and soldering log 15. Lower part of switch box
16.Connectiong cord 17. Connection cable fixer nut
18. Connection cable fixer part 1 19. Connection cable fixer part 2
20. Screws(M3*12) 21.Round rubber support
22. Sound muffler (Foam filter) 23 Screws(M3*10)
24. Plastic guard 25. Screw(M5*40) and washer
26. Motor clamping ring 27. Screws(M8*15) 28. Canister
29. Washer 30. Upper rubber depression ring 31. Cloth dust bag
32. Paper dust bag 33. Cover seal ring
34. Cover 35. 1 Bent connector tube 35.2 Screw for hose
35.3 Screw cuff 36. Wire connector 37. Handle 38. Hose
39.Carrier package
MAINTENANCE INSTRUCTION
!
WARNING
:
The following information is for use by qualified service
personnel only and is to provide guidance for troubleshooting and maintenance.
UNPLUG the vacuum when working on the motor or any electrical
part.
CHECK the condition of all electrical cords before each use.
DO NOT lubricate the motor; it is equipped with sealed bearings.
◆
The appliance has NO user serviceable parts.
PROPER STORAGE
When the vacuum is not in use, it should be stored in a dry place
ELECTRICAL CORD CARE
NEVER stretch the cord tightly between the vacuum and the outlet. A cord
that is stretched or pulled will not function properly and creates a danger.
After vacuuming, unplug the cord and wind it up loosely .
CARING FOR YOUR VACUUM
1.
Every time you finish vacuuming, shake out the cloth and Paper dust
bags (No.31 and No.32). Clean Filters as needed.
2.
After each shift, wipe the inside and outside of the vacuum with a
household cleaning agent.
