![background image](http://html1.mh-extra.com/html/guzzanti/gz-8601/gz-8601_instruction-manual_2279473144.webp)
12
TURNTABLE INSTALLATION
Hub (underside)
Glass tray
Turntable
shaft
Turntable ring assembly
a. Never place the glass tray upside down.
The glass tray should never be restricted.
b. Both glass tray and turntable ring
assembly must always be used during
cooking.
c. All food and containers of food are
always placed on the glass tray for
cooking.
d. If glass tray or turntable ring assembly
cracks or breaks, contact your nearest
authorized service center.
INSTALLATION AND CONNECTION
1. This appliance is only intended for domestic use.
2. This oven is intended for built-in use only. It is not intended for counter-top use or
for use inside a cupboard.
3. Please observe the special installation instructions.
4. The appliance can be installed in a 60cm wide wallmounted cupboard.
5. The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket.
6. The mains voltage must correspond to the voltage specified on the rating plate.
7. The socket must be installed and connecting cable must only be replaced by a
qualified electrician. If the plug is no longer to accessible following installation,
an all-pole disconnecting device must be present on the installation side with a
contact gap of at least 3mm.
8. Adapters, multi-way strips and extension leads must not be used. Overloading can
result in a risk of fire.
The accessible surface may be hot during operation.