13
4. Adjust heat setting by touching the slider regulating key (D) control.
POWER DOWN
POWER UP
• If you don’t choose a heat setting within 1 minute, the Induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
u alternately with the heat setting
This means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you’re using is not suitable for induction cooking or,
• The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on
it.
When you have finished cooking
1. Touching the relevant zone select key(A) that you wish to switch off.
2. Press the slider regulating key (D) control to “0” level,
3. Beware of hot surfaces “H” will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe temperature. It can also be
used as an energy saving function if you want to heat further pans, use the hotplate
that is still hot.
Using the Boost function
Actived the boost function
1. Select the heating zone by touching the zone select key (A).
2. Touching the boost control key (E)
, the zone indicator show “P.” and the power
reach Max.
This means that:
1. Touching the relevant zone select key (A) that you wish to cancel.
2. Touching the slider regulating key (D) to cancel the Boost function, then the cooking
zone will revert to level 9.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after 5 minutes.