21
2. When cooking timer expires, the corresponding heating zone will be automatically switch off
and show “H”.
NOTE: If you want to change the time after the timer is set, you have to start from step 1.
Power Boost
You can use the ‘Boost’ function to boost the power of the relevant heat zone for a maximum of
5 minutes.
• To operate, press the heat zone selection button (boost zone only) and then press the Boost
function control (6).
• The heat zone will operate at full power for 5 minutes.
• You can select the Boost function when you are already operating the heat zone at a lower
heat setting. The Boost function will then operate at maximum heat for 5 minutes and then
return to the pre-set heat setting.
• If you don’t choose a heat setting within 1minute, the ceramic hob will automatically switch
off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
• You can modify the power level from 0 to 9 By the slide control.
Large Heating area
Free Zone
• This area can be used as a single zone or as two different zones, accordingly to the cooking
needs anytime.
• Free Zone is made of two independent inductors that can be controlled separately. When
working as a single zone, a cookware is moved from one zone to the other one within the free
zone keeping the same power level of the zone where the cookware originally was placed,
and the part that is not covered by cookware is automatically switched off.
• Important: Make sure to place the cookwares centered on the single cooking zone. In case
of big pot,oval,rectangular and elongated pans make sure to place the pans centered on the
cooking zone covering both cross.
When you cook a bigger size or oval pot, you need get a larger heating area. Touch the required
zone and then press ”+” ”-”, then touch "
" or "
" or "
"’ to select double ring, triple ring
or oval ring to heat the proper pot, touch again will turn of double ring, triple ring or oval ring.