![background image](http://html1.mh-extra.com/html/guzzanti/gz-409bt/gz-409bt_instruction-manual_2279403045.webp)
5
5. Screw off sperical nut from the castor, align the shaft to the hole of the castor
mounting plate, insert in, and screw on the spherical nut.
6. Repeat 2,3,4 and 5 on the rear radiator for mounting of the rear castors.
Note: The rear castors must be mounted between the last two fins.
INSTRUCTIONS FOR USE
1. Before using the heater, make sure that it is on a flat and stable surface. Damage
may occur if it is placed on an incline or decline.
2. Set all the controls to OFF position and insert the plug into a socket-outlet. Be sure
that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as
follows. The switch I for low heat, the switch II for medium heat and both switches
on for high heat.
4. When your room reached the desired temperature, slowly rotate the thermostat
knob counter clockwise until the indicator light goes out. The thermostat can now
be left at this setting. As soon as the room temperature dropped below the set
temperature, the unit will switch it self on automatically until the set temperature
has been reached again. In this way the room temperature remains constant with
the most economical use of electricity.
5. If you want to change the room temperature setting, rotate the thermostat knob
clockwise to raise the temperature, or counter clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when
parts of the heater are getting excessively hot.
7. To completely shut the heater off, turn all controls to OFF, and remove plug from the
socket-outlet.