Preparation remove the kettle chassis and placed in a stable horizontal platform, according to the
requirements, connect to the power and add the water that it needs to be heated into bottle (the
amount of water required that is not be less than the minimum water level line and not higher than the
highest water level line).
1. Place the kettle on the electric chassis that it connected to the electricity, all button lights flash
once (all test), while buzzer alarms that it means the product is in standby mode. The water level
indicator light keeps bright. No any operation during 3 minutes , the water level indicator will
automatically turn off.
2. In standby mode, press any one of temperature button, the indicator light of corresponding button
will be bright. At this point, press the „START“ button to start heating, the kettle will automatically
stop heating when reaches the target temperature.
3. In standby mode, press „START“ button, the product directly start to work according to the saved
gear .If the power is off and re-power into the standby mode, then press the „Start / Stop“ button
and product will directly work in Boil gear.
4. In standby mode, press the „Keep WARM“ button to open the insulation function, the acquiescent
temperature gear: 70°C. At this point, press the „START“ button to start the heating, when water
reach the target temperature and it will be into the insulation mode.
5. During the work process, press the other gear keys to select other gears. Pressing the „Keep
WARM“ button can turn on or off the heat preservation function. Press the „Start / Stop“ button to
stop the current work .
6. If you turn on the insulation function, holding time is 30 minutes, the machine will automatically stop
working after the insulation, all the lights go out into standby mode.
Dry products
If the phenomenon of dry burning occurs during use, the machine will automatically enter the
protection state. Heat pipe will stop heating, all button operation is invalid, the indicator does not light.
The machine must wait for the kettle to cool down and re-enter the standby mode.
Dry protection
The kettle has anti-dry function. If the tank has a small amount of water or no water and press the start
button, then the safety switch will automatically power off after the bottom of the kettle is dry. If you
want to re-boil water, you need to wait for the water machine to cool down before pouring water into
the kettle, and then press the start button to start re-boil water.
Cleaning and maintenance
The kettle corresponds to the bottom of the heating element, which does not change the use of
water.
Note: Wiping the kettle will cause misoperation or parts damage, basic cleaning should be
done according to the following procedures:
1. Before power on, you must first check whether the electrical parameters on the product that it can
be complied with the electrical parameters of the used power supply.
2. The used power must have a reliable ground connection.
3. Please boil liquid water as an automatic cleaning, and drain boiled water at the first use.
4. Only liquid water available, not allow to pour into other liquids, such as milk, coffee and so on.
5. After using the product ,we must cut off the power, unplug the plug, and dry with a dry cloth, and
properly place.
6. Where water quality is harder ,we must use this product to boil lemonade at least once a month in
order to remove scale.