29
Section 1. Installation
•
IMPORTANT!
This appliance must be left to stand in an upright
position for at least 4 hours before being switched on for the first
time.
• Remove all packaging and securing tape from the appliance.
• Wash the interior of the appliance with luke warm water containing a
small mount of bicarbonate soda (5ml to 0.5 litres of water).
• Position the appliance in a dry atmosphere and out of direct sunlight.
• Do not position next to a cooker or other sources of heat, i.e.
radiator.
• If positioned next to another fridge or freezer, leave a minimum gap
of 2cm between the appliances in order to avoid condensation.
• A clearance of 50mm should be left above the appliance. If this
cannot be achieved you should ensure a clearance of 25mm is
maintained on each side of the appliance.
• Please ensure that there is a small ‘air-gap’ between the condenser
on the rear of the appliance and the rear wall.
• Do not place or store heavy items on the top of this appliance.
• Ensure that the appliance is positioned on a firm flat floor.
• This appliance must be level. Adjust the level by screwing the
adjustable feet up or down (use your fingers or a suitable spanner).
• Ensure that the appliance is upright and both feet are in firm contact
with the floor so that the cabinet is stable.
• Connect the plug to an adjacent 13amp socket outlet and ensure
that the appliance is not standing on the supply cable.
Section 2. Safety Advice
• Please read this booklet thoroughly before installing and switching
on the appliance. The manufacturer accepts no responsibility for
incorrect installation and usage.
• If this appliance is to replace an old refrigerator with a lock, as
a safety measure break or remove the lock and/or door before
disposal.
Summary of Contents for gz-14
Page 14: ...14...
