18
HOW TO DRAIN THE INTERNAL WATER TANK
* You will need a small pan, approximately 1” high to catch the water
coming out of the water tank. Once the water tank is empty, the unit will
resume operation within a few minutes.
1. Do not move the unit when the water container is full. (Water will
spill out)
2. Place a small pan under the condensation drain hole on the bottom
side of the unit.
3. Remove the drain plug from the condensation drain hole. The
condensate water will drain out automati-cally.
4. When the drain pan is full, install the drain plug back onto the
condensation drain hole to stop the water flow.
5. Empty the drain pan.
6. Repeat steps 2-5 until all the water is emptied.
NOTE:
Once the condensate tank has been emptied, firmly press the
drain plug back onto the condensa-tion drain hole (Fig 16.1). It is not
advised to use continuous drainage when the room temperature is
higher than 90˚F.
Condensation
Drain Hole
Drain Plug
Fig. 16.1
NOTE:
You may also use enclosed Optional Drain Tube to facilitate the
draining process, make sure to re-plug the Drain Stopper once the
condensation tank has been emptied (Fig 16.2).