![background image](http://html1.mh-extra.com/html/guzzanti/gz-1201/gz-1201_instruction-manual_2279355136.webp)
16
dRAINAGE
During the process of cooling, some water will be extracted from the air
into the unit.
If the reservoir is full, both of the compressor and motor will stop and the
units would buzz (you can press any button to stop the buzz). The W.F.
indicator will flash to show you.
To make the cooling work again, please empty the water by one of the
following ways:
1. Turn off the air conditioner and
avoid moving it when full.
2. Position a container (a water
tray for example) underneath
the drain hole.
3. Remove the drain knob &
rubber plug from the drain hole
and allow the water to drain
out.
4. When the container is almost
full, replace the rubber plug in
the drain hole and empty the
water tray.
5. Repeat until the unit is emptied.
6. Replace the rubber plug and
tighten the drain knob firmly.
7. Switch on the unit - the full
water or compressor operating
indicator should not be flashing.
Fig. 13