Guzzanti 8594186721641, Instruction Manual, Page: 66 / 72

6
Warning! It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to
your domestic power supply. The appliance must be earthed. The power supply cable plug is provided
with a contact for this purpose. If the domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed. This
appliance complies with the E.E.C. Directives.
Space Requirement
The following are recommend. Clearances around the chest freezer
Sides 10
cm
Back 10 cm
Top 70 cm
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class
indicated on the rating plate of the appliance:
Climate class Ambient temperature
SN + 10 °C to +32 °C
N + 16 °C to +32 °C
ST + 16 °C to +38 °C
T + 16 °C to +43 °C
Daily Use
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with
lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then
dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Temperature Setting
UE!#V
Position 1 -Cold Position
Position 5 - Colder. Normally setting at this position
Position 7 - Coldest
Position Max - To fast freeze much hot food, after using the freezer for 24
hours reset the freezer to your desired setting.
U*!%!!&
particularly hot or if you open the door often.