INSTRUCTION MANUAL | Mayor 640-770-820
Ex
cep
t err
or
s, subjec
t t
o t
echnic
al chang
es. Non-c
ontr
ac
tual pho
to
s and pic
tur
es.
5
Safety regulations
Operational safety
Read all safety instructions contained in this instruction
manual and all warning labels attached to the machine.
Keep the warning labels in a legible condition and replace
all damaged or missing labels immediately.
The machine may only be used if all safety-relevant
protective devices (e.g. detachable protections) are pre-
sent and fully functional.
Check nuts and screws regularly for tightness and tighten
if necessary. Check tyre pressure regularly and/or before
starting work.
In the case of malfunction, stop the machine immediately
and secure it.
Accident prevention
In addition to the instruction manual, the accident pre-
vention regulations of the agricultural employers’ liability
insurance associations must be observed!
Road traffic safety
When driving on public roads, path and public areas, it is
important to observe the according road traffic laws.
Observe the permitted transport widths and attach the
lighting, warning and protective devices! If the outer edge
of the mounted attachment has a distance more than 40
cm from the light-emitting surfaces of the tractor’s limiting
and rear lamps, additional front and rear position lamps
are required. If official registrations plates are covered by
attachments, these must also be attached to the machine.
Observe the transport height.
Pay attention to the permitted axle loads, tyre loads and
total weights. The front axle of the tractor must be loaded
with at least 20% of the tractor’s unladen weight in order to
maintain sufficient steering and braking ability.
The driving behaviour is influenced by attachments.
During cornering, the large overhang and inertia of the
machine must be taken into consideration.
Clean the entire machine before driving on the public road
from soil that has been picked up.
Riding on the machine is strictly forbidden.
Exemption for overwidth
For machines with more than 3 m transport width a certifi-
cate of exemption is required to drive on public roads and
path. The conditions of the exemption certificate must be
strictly observed.
Prior to use
Before each use, always check that all the screw and plug
connections are tight, for example:
•
safe fixing of the wheels and tyres
•
safe fixing of the hydraulic cylinders
•
the bolts, clevis and locking screws
•
the clamp connections
•
the hitch on the tractor
Pay attention to the “floating” mount of the levelling bar!
During operation
•
Check the area around the machine (children) before
starting. Ensure that there is sufficient visibility.
•
None of the prescribed and provided protective devices
may be removed.
•
No persons are allowed within the swivel range of
hydraulically actuated parts.
•
Use ladders and platforms only while the machine is at
a standstill. Riding on the machine during operation is
strictly forbidden!
