mega macs PC
12 Applications
An overview of the available applications is shown here.
12.1
Calculator
Perform general calculations here.
12.1.1 Activating the Calculator
Proceed as follows to make calculations:
1. Select
>Applications<
in the main menu.
2. Select
Calculator
with
.
3. Perform the requested calculations.
12.2
Pass Thru
Here you can transmit data from the shop PC to the vehicle in the shop.
12.2.1 Calling Up PassThru
Perform the steps as described in section
Executing the HGS PassThru Software
to call up PassThru.
12.3
Calculations
Here you can perform the the following conversions:
•
Fuel consumption
•
Piston speed
•
Current/power output/resistance
•
Conversion of technical units
12.3.1 Calling Up Calculations
Proceed as follows to call up calculations:
1. Select
>Applications<
in the main menu.
2. Select
Calculations
with
.
3. Select the required calculation type.
4. Select the required size.
5. Open the virtual keypad with
.
6. Enter the requested value.
89
