mega macs PC
2 User Information
2.1
Safety Precautions
2.1.1 General Safety Precautions
•
The PC VCI is intended for use on motor vehicles only. It is a precondition for the use of the PC
VCI that the user has knowledge of automotive technology and is therefore aware of the
sources of danger and risks in the workshop and on motor vehicles.
•
Please read the entire user manual thoroughly and carefully before using the mega macs PC.
You can also find the user manual under
in the mega macs PC.
•
All notes given in the individual sections of this user manual apply. The following measures
and safety precautions must also be followed.
•
Furthermore, pay attention to all general instructions from labor inspectorates, trade
associations and vehicle manufacturers as well as all laws, legal ordinances and instructions
which have to be commonly obeyed by a repair shop.
2.1.2
Safety Precautions – Risk of Injury
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the
vehicle. Therefore regard the following:
•
Prevent the vehicle from rolling.
•
Additionally place gear selector lever of AT vehicles to park position.
•
Deactivate the start/stop system to avoid an inadvertent engine startup.
•
Connect the PC VCI to the vehicle only when engine is shut down.
•
Do not reach into rotating components when engine is running.
•
Do not run cables near rotating parts.
•
Check the high-voltage parts for damage.
10
