EN
17
Preparing for use
The extractor hood model complies with the relevant safety regulations for kitchen ap-
pliances in private households. The requirements regarding the installation location are
described in the user documentation supplied with the appliance. If you have any
doubts as to whether your intended installation location meets the requirements, please
contact our service department. Damaged appliances may not be put into operation.
Defective parts must be replaced with genuine spare parts or parts specified by GUT-
MANN. Repairs should only be carried out by authorised technical staff.
Danger of electric shock !
Do not clean the hood with a steam cleaner or water pressure. When cleaning the
hood, it must first be disconnected from the power supply.
Danger of crushing !
When inserting the filters and closing the covers, please make sure that there are no
body parts in between.
Design
From an aesthetic perspective, the extractor hood may differ from the drawings in these
operating instructions. However, the operating instructions, maintenance, cleaning and
installation procedures are always the same. The drawings and plans must be consul-
ted in the case of customer
-
specific products.
Part.No.: TZ444
Metal grease filter
Accessories / Spare parts
Part.Nr.: TZ4908
Activated carbon fine dust filter
