12.1.
17
Mixers - replaceable RA models
1. Notes for the user
4
The mixer may only be fitted and operated by a trained person.
Based on the definition laid down in EN 60204-1.Trained person:
A person who is taught by a qualified employee about the tasks entrusted to him/her and the pos-
sible hazards caused as a result of improper conduct and if necessary trained and who has learnt
about the necessary protective equipment and protective measures.
1 . 4
Safety instructions
Failure to observe the specified hazard warnings may pose a risk to persons as well as the envi-
ronment, mixer and plant. Specifically, failure to observe the warnings may cause the following haz-
ards to arise:
• the failure of important functions of the mixer and the plant.
• the failure of prescribed methods for maintenance and repairs.
• hazards to persons caused by electrical, mechanical or chemical agents.
• environmental hazards on account of leakage of hazardous substances.
1 . 5
Safety tests
Safety tests "carried out by the manufacturer in the factory".
Safety tests according to DIN EN 60 204-1
- Continuous connection of the protective conductor system.
- Insulation resistance tests.
- Voltage tests.
- Protection from residual voltages.
- Functional tests.
- The functions of the electrical equipment, especially those which relate to safety and protective
measures.
ATTENTION
The mixer may only be operated when it is in perfect working order. In addition
to the documentation, instructions on the following also apply:
- Internal plant working and safety instructions
- National regulations in the country of implementation
- Generally accepted safety regulations
- Accident prevention regulations
D A N G E R
• The electrical connecting cable must be laid in a position where nobody can trip over it!
• Only assemble or disassemble the mixer when the mains plug has been pulled out.
• Please ensure that the container fittings are connected correctly to the filled container when
using the mixer.
• Close the container fitting before disassembling the mixer.
• Pay attention to ensure that you collect or divert the product liquid that is produced when
employing or removing the mixer.
• Avoid knocking over the electrical connecting cable.
• Please ensure that the electrical connecting cable does not cause an injury.
• Pay attention to the clockwise field of rotation when configuring the three phase current of the
motor. Otherwise two phases of the connecting cable must be exchanged by qualified electri-
cians.
