■
■
■
■
■
■
■
■
Connect power wire to wire socket.
Connect to power source.
Apply suitable amount of gel to skin at
target area ( a circle with 2cm diameter).
Switch on the power. If power signal light is
on, start to use massager.
DO NOT stop moving treatment head while
in use.
The power automatically turns off in 10
minutes or, if desired, the power can be
turned off sooner by pushing the ON/OFF
switch to OFF.
After use, wipe excess gel off the treatment
head with a damp cloth. Disinfect treatment
head with antiseptic wipe. Do not immerse
in water or solvent.
After using the device, clean skin with water
to remove gel.
Clean skin before and after use.
Precautions
Skin Preparation
7
■
■
■
■
■
■
■
■
■
■
DO
DON’T
Do follow instructions.
Do keep the treatment head clean.
Do clean cables with water and mild soap.
Do not use rubbing alcohol or any other
solvent.
Do not damage your Ultrasonic Massager
by bumping, dropping, or rough use.
Do not immerse in water or other solvents.
Do not pull or kink cables.
Do not store below 32F
（
0
℃
）
or over
122F
（
50
℃
）
When power shuts off, leave the unit off
for 30 minutes. After every treatment,
disconnect AC adaptor from power source.
Do not impact the treatment head or drop
DO’S and DON’TS
8
