background image

20

Statement

Statement

The intended use: The unit is intended to be used by adults at home or
medical centre to measure blood pressure and pulse rate from the upper
arm.

The unit satisfies the requirements of IEC60601-1 Medical electrical
equipment,EN1060-1:Non-invasive sphygmomanometer,EN1060-3: 
Non-invasive sphygmomanometer

The unit has passed the EMC Test.

The Unit complies with IEC 80601-2-30.

Blood pressure measurements determined with this device are equivalent 
to those obtained by a trained observer using the cuff/stethoscope 
auscultatory method, 
within the limits prescribed by the American National Standard, Manual, 
electronic, or automated sphygmomanometers.

The risk of patient and user can be lowered to acceptable level.

Substitution of a cuff different from that supplied might result in
measurement error.

Specifications are subject to change without notice due to improvements in 
performance.

Federal law restricts this device to sale by or on the order of a physician.

Equipment not suitable for use in the presence for flammable mixtures

The unit might not meet its performance specifications if stored or used 
outside the following spcified temperature and humity ranges.

21

Warranty Information

The unit, excluding the unit cuff, is guaranteed to be free of defects in 
workmanship and materials  for a period of two years from the date listed
 on the purchase record. when used in accordance with the instructions 
provided with the unit. The unit cuff is warranted to be free from detects in 
materials and workmanship appearing within one year from the date listed
 on the purchase record when the unit is used in accordance with the
 instructions provided with the unit.

For repair under this warranty. Our authorized service agent must be

 advised of the fault within the period of the warranty. This warranty covers
 parts and labor only under normal operations. A transportation fee or
 freight fee that may be incurred will be the owner's responsibility. Any 
defect resulting from natural causes, e.g., flood, hurricane etc., is not within 
this guarantee. This guaranty does not cover damage incurred by: use of 
the unit not in accordance with the instructions, accidental damage, or
 being tampered with or serviced by unauthorized service agents. 

Unit subjected to misuse, abuse, and neglect of these manual content, 
non-instructional purposes; unauthorized repair or modifications will be
 excluded from this warranty. This guarantee specifically excludes 
expendables and consumables, for example batteries. All warranty claims 
must be directed to the distributor responsible for the sale of the device. 
The content of this warranty is subject to change without further notice.

Periodical check:  
Sensitive measuring devices must be checked from time to time for 
accuracy and leakage, we therefore recommend that the performance 
should be checkedevery 2 years 
Check and maintenance and repair for the unit, please contact the local 
distributorfor details.

Summary of Contents for BPM210UM














Reviews: