27
Specifications
BPM165W
LCD Digital Display
Oscillometric Method
Measurable
Model No.
Display
Measuring Principle
Circumference of Wrist
13.5~21.5cm (5.3''~8.5'')
Electric Shock Protection
Measurement
Range
Accuracy
Pressure
Pulse
Pressure
Pulse
Pressure
0 to 299 mmHg (0~39.9 kPa)
40 to180 Pulses/min
3 Digits Display of mmHg or kPa
3 Digits Display
Memory/IHB/Heartbeat/Low Battery,etc.
3 mmHg (0.4kPa)
5% of reading
Pulse
Internal power supply appliance type B
LCD
Indication
Symbol
28
Specifications
Automatic by Internal Pump
Automatic by Air Valve
Approx. 110g (Batteries not included)
80~105 kPa
2 AAA Alkaline Batteries
Within 2 Minutes
Memory 90 Sets Measurement Values
Memory Function
Inflation
Power Source
Rapid Air Release
Automatic Turn Off
Gross Weight
10~40
℃
(50 ~ 104 F )
-20~60
℃
(-4 ~ 140 F )
15 ~ 90% RH
(Noncondensing)
10 ~ 95% RH
(Noncondensing)
Temperature
Humidity
Temperature
Humidity
Operating
Environment
Barometric Pressure
Storage
Environment
STA
RT/S
TOP
BPM165W
SET
MEM
STA
RT/S
TOP
BPM165W
SET
MEM
STA
RT/S
TOP
BPM165W
SET
MEM
STAR
T/S
TOP
SET
MEM
BPM1
65W
25
Care and Maintenance
Care
Avoid subjecting the monitor to strong shocks or vibrations, such as dropping
the nuit on the floor.
Use the unit consistent with the instructions provided in this manual.
Use only authorized parts and accessories.
Keep the unit in the storage case
when not in use.
Clean the unit with a soft dry cloth.
Do not use any abrasive or volatile
cleaners.
Never immerse the unit or any
components in water.
Maintenance
26
Care and Maintenance
naphtha
thinner
gasoline
Store the unit in a clean and dry
location. Do not subject the unit to
extreme hot or cold temperature,
humidity and direct sunlight.
Remove the batteries if the unit will
not be used for 3 monthes or longer.
Always replace both of the batteries
with new ones at the same time.
Do not wet the cuff or attempt to clean
the cuff with water.
Do not clean the body and cuff with
naphtha, thinner or gasoline etc.
