CMG-DM16
During the initial ‘coarse’ adjustment only the coarse voltage
control is used and no ‘drift’ calculation is made. If the system
is operating in a similar environment to that when the system
was last powered (i.e. same temperature) the saved control
parameters will be appropriate and the system should rapidly
switch to the ‘fine’ control mode.
14
Issue C
Synchronisation
process commenced
Internal clock synchronised to GPS
Notice time shift of 2 seconds from
17:10:30 to 17:10:32 in this example
Synchronisation control
parameters.(zero ‘drift’ in
the first instance during
coarse adjustment. ‘pwm’ is
a saved parameter)
Summary of Contents for CMG-DM16R8
Page 23: ...Operator s Guide July 2016 23...
