Getting started
12
· G&D miniMUX8
Auto accessing active computers (Autoskip)
The
Autoskip
function accesses any
active
computer in sequence.
After each switching, an information display at the moni-
tor shows the name of the active computer, the name of
the KVM switch and the information
SKIP
.
How to start the
Autoskip
process:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Select
Autoskip
and press
Enter
.
How to stop the
Autoskip
process:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display or use a key combina-
tion to switch the channel.
Manually accessing computers (Stepscan)
After the
Stepscan
mode has been accessed, press a key to access the previous or next
computer.
After each switching, an information display at the moni-
tor shows the name of the active computer, the name of
the KVM switch and the information
STEP
.
How to start the
Stepscan
process:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Select
Stepscan
and press
Enter
.
NOTE:
If the
Autoskip
function is enabled, keyboard and mouse inputs are for-
warded to the active computer.
The
Autoskip
function stops during those inputs and continues after the inputs have
been made.
NOTE:
In the default configuration the
Autoskip
function accesses all computers.
You can change this setting as described in the paragraph
CPU 1
miniMUX8
SKIP
CPU 1
miniMUX8
STEP
