Installation
5
· G&D DVIMUX4-PS/2
Connecting the computers
Line In:
If the audio signals of the computers are to be output over the speakers which are
connected to the KVM switch, use one of the audio connection cables (
Audio-M/M
) to
connect the computer’s
Line Out
interface to this interface.
Keyb.:
Use the purple plug of a
Twin-PS/2
cable to connect the
purple PS/2 socket (keyboard) to this interface.
Mouse:
Use the green plug of a
Twin-PS/2
cable to connect the
green PS/2 socket (mouse) of the computer to this interface.
DVI-I CPU:
If the computer is equipped with a DVI-D video output, use a digital
video cable (
DVI-D-DL-M/M
). If the computer has an analog VGA output, use an
analog video cable (
VGA-M/DVI-A-M
).
Connect the (first) video output of the computer to this interface.
IMPORTANT:
KVM cable sets are required to connect the computers to the KVM
switch. All available KVM cable sets are listed on page 31.
Assign the cable sets to the different computers and have them available for instal-
lation.
NOTE:
To connect the (maximum four) computers to the KVM switch, the inter-
faces as shown below are available for each computer.
The label (e.g.
CPU 1
) assigns the interface to a specific computer and to the corre-
spondent button on the front panel.
Figure 3: Interfaces to connect the computers
NOTE:
If you purchased a multi-channel variant of the KVM switch, connect the
DVI-I CPU x.2
(MC2, MC3 and MC4),
DVI-I CPU x.3
(MC3 and MC4) or
DVI-I CPU x.4
(MC4) interfaces to the correspending video output of the computer.
Monitor 1
Keyb.
Mouse Speaker
CON
CPU 1
DVI-I CPU 1.1
Keyb.
Mouse
Line In
CPU 2
DVI-I CPU 2.1
Keyb.
Mouse
Line In
CPU 3
DVI-I CPU 3.1
Keyb.
Mouse
Line In
CPU 4
DVI-I CPU 4.1
Keyb.
Mouse
Line In
Power
Summary of Contents for DVIMUX4-PS/2
Page 1: ...G D DVIMUX4 PS 2 Installation and Operation...
Page 37: ...Notes G D DVIMUX4 PS 2 34...
Page 38: ...Notes 35 G D DVIMUX4 PS 2...
Page 39: ...Notes G D DVIMUX4 PS 2 36...