Guntermann & Drunck DL-DVI-Vision-CAT series, Installation And Operating Manual

Page: 96 / 128

Configuration
29 · G&D DL-DVI-Vision-CAT
Related topics:
 Operating the KVM extender exclusively
on page 13
 Changing the video mode of consoles
on page 29
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
Conf
ig P
anel
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to configure the access to the local work-
station (on the CPU module).
Click on the tab CON if you want to configure the access to the remote work-
station (on the CON module).
5. In the field Permanent access mode , select one of the following options:
Enabled  right for exclusive access is granted ( default )
Disabled  right for exclusive access is denied
6. Click on Save .