Leakage
chimney and
hood connection
on the spot.
Remove the chimney and
seal.
Does not work
device
lighting.
Cracked or
improperly installed
light bulb.
Replace the bulb as described
in these instructions.
Too far
between the stove and
hood.
Not enough
s extraction.
Attach the hood to
the correct height.
Mounting screw
screwed
not enough.
Tighten the screw and
mount the hood in a
horizontal position.
Hood
sloping.
NOTE.
Any repairs to this electrical appliance must comply with
your local, state, and federal laws. If you have any
questions before starting any of the work described above,
contact the Technical Support Center. Be sure to unplug the
appliance before disassembling it.
Cleaning and maintenance
Attention.
●
Unplug the appliance before cleaning
and maintenance. Make sure that the
hood is disconnected from the mains (ie
the mains plug is unplugged).
●
The surfaces of the housing are sensitive to scratches,
therefore, carry out the cleaning work in accordance with the instructions to ensure the
best cleaning result without damaging the surface of the appliance.