Step 1:
With the frame open halfway, insert iPad
into bottom case.
Step 2:
Remove protective film from both sides of
screen overlay. Keep in mind which side is
top and which side is bottom per the
instruction labels on overlay.
Step 3:
Place overlay onto iPad screen, Make
sure overlay cutout aligns with iPad
Home button.
Step 4:
Align and place frame over bottom case.
Make sure iPad Home button aligns with
frame cutout. Press frame into case by
applying pressure along the frame’s
perimeter until all sides are secured.
Step 1:
Insert finger through stand opening.
Step 2:
Pull tab until stand locks into the wanted
viewing/typing position.
Stand Instructions
Viewing position
Note: there are 2
viewing positions
Typing position
ASSEMBLY INSTRUCTIONS
DropTech Rugged iPad Case
Congratulations on your new case!
www.GumdropCases.com
