8
INSTALLATIONS
Place the plastic liner firmly inside the glass bowl as shown
in the Fig.1
Align the impeller unit onto the anchor pegs and push
it onto the base plate as shown in Fig.2
To remove, gently pull out the impeller unit as shown in Fig.3
from the base plate and pull up the plastic liner.
To avoid risk of infection disease, discard the liner after
each use
Fig.2
Plastic Liner deformed
by the pegs
Thin Plastic Liner
Impeller Unit
Plastic Liner
Hole in the heavy plastic liner
Heavy plastic liner
Piece of thin plastic sealed
to the heavy plastic liner
Base Plate fixed to motor behind
Fig.1
Glass Bowl
Fig.3
Poly Liner Installation
(Glass Bowl only)
Anchor Pegs
Fig.4
Service Panel
To remove the service panel, remove all screws and detach
the panel from the base as shown in Fig.4
Flat Panel Service
