Gently pull out the jet cover in the arrow direction to remove
then carefully remove the suction control screen, the jet inner cover
Align and snap the jet inner cover, the suction control
screen on the jet cover. Then snap on the jet cover in th
arrow direction to the housing to close
Cleanjet-SL
(Refer to CleanJet-SL Assembly for more details)
Cleanjet Cover Removal and Installation
7
INSTALLATIONS
Align fingers to the open, turn counter-clockwise
and pull in the arrow direction to remove jet cover
Align jet cover on the jet housing then turn clockwise
to install jet cover
1
2
2
1
The Open
Cleanjet
Tub Wall
Under Seat Compartment
1
2
Cap Head
Metal Claim
Motor
Impeller & housing
Jet Cover
1
Turn the Cap Head counter-clockwise, carefully remove the metal claim and the jet motor
2
Carefully remove the Jet Cover then the Impeller & Housing inside the Tub. You may have to remove water sealant between
the Impeller Housing and Tub wall
To assemble the jet unit, please install in the reverse orders above. You may have to apply some water sealant
between the Impeller Housing and The Tub wall
Jet Unit Removal and Installation
!
Warning
Disconnect the foot-spa unit from any
electrical source before disassemble the jet
unit. All surface must be dry. Some jet
components may contain sharp object and
very hot after usage.
Some jet components are located under
the base unit behind the tub wall
