SLIDE OUT SYSTEMS
If your vehicle is equipped with a slide out there are several
precautions that should be taken before operation of the slide room.
•
Make sure you have clearance on the exterior.
•
Make sure that all interior items are clear.
•
Make sure that you have sufficient battery power.
If heavy snow or ice loads are expected, consider closing the slide-
out to avoid the possibility of it freezing in the open position. It is
also recommended that the slide-out be left in the closed position if
the travel trailer is stored/unused for a long period of time.
Slide Out Systems Owner’s Manuals & Troubleshooting
Gulf Stream products carry a variety of electrically operated slide
out products. The electrical slide out product installed in your
particular RV is accompanied by an owner’s manual from the slide
out system manufacturer. For troubleshooting, maintenance and
proper use of your particular slide out, please refer to the slide out
owner’s manual supplied by the slide out system manufacturer.
Most slide out system owner’s manuals and troubleshooting guides
can also be found on the slide out system manufacturers websites.
Lippert Electric Through Frame Slide-Out System
Extending Slide-out Room
1. Level Unit
2. Verify the battery is fully charged and hooked up to the
electrical system.
3. Remove transit bars (if so equipped).
4. Press and hold the IN/OUT switch in the OUT position
until room is fully extended and stops moving.
5. Release switch, which will lock the room into position.
NOTE: Only hold OUT switch until room stops.
Retracting Slide-out Room
1. Verify the battery is fully charged and hooked up to the
electrical system.
2. Press and hold the IN/OUT switch in the IN position until
the room is fully retracted and stops moving.
3. Release the switch. This will lock the room into position.
NOTE: Only hold IN switch until room stops.
4. Install the transit bars (if so equipped).
63
