6
©
Guldmann
GB
-2253
/06
/18 • # 944137
©
Guldmann
GB-
2253
/06
/18 • # 944137
5. Use the operation panel to raise and lower the
platform.
6. Raise the lifting platform to the height of the
door to the train. Adjust the width of the ramp
and tip the ramp down. The whole of the width
of the ramp should be supported.
Driving from the lifting platform into the train
can now take place easily and safely.
If LP11 - Side Exit stops and starts beeping,
this indicates that LP11 - Side Exit is overloa-
ded. After the overload has been removed, the
platform can operate again.
7. After use both ramps must be tipped upwards and locked and the lifting
platform must be in its lowest position before it is moved. No persons/objects
must be under the platform when it is lowered.
