9
2 .
Mounting of adapter hook from lifting hanger to the digital scale
Press on the quick release button (3) and fasten the adapter hook (4).
Fasten the lifting hanger by inserting the adapter hook (4) on the lifting hang
-
er.
3. Attach the desired sling on the lifting hanger and reset the digital scale (see
section 4.00). The display will subsequently show 0.0.
4. Remove the sling from the hanger. Place the sling on the person and attach it
on the lifting hanger again.
5. Carefully lift the person. When the sling with the person is at rest and freely
suspended, the relevant weight will be shown on the display.
Important
Always reset the scale before weighing takes place.
Note:
The power saving function will automatically shut off the display after 30 sec.
if the scale has no load. Can be changed (see section 7.00).
6. Carefully lower the person after the scale has been read.
Warning
This scale has been produced in order to weigh the person in connection
with him/her being relocated, for example between a bed and a chair. In con
-
nection with reduced lifting height, it may be necessary to divide the process
in 2, weighing of the person and subsequent detachment of the scale, and
then performing the final relocation, for example between a bed and chair.
The scale has not been produced for use in connection with transport of the
person. In the event of transport, the scale must be detached.
©
Guldmann
G
B
-06/2021 • # 560642_101
©
Guldmann
G
B
-06/2021 • # 560642_101
