6
5
Power on / off
Power on：
Power off：
Attention: make sure the camera is secure before powering on the gimbal.
3. Functions Modes
press and hold the function button until the status indicator turns green and gimbal beeps.
press and hold the function button until the status indicator changes from a flashing red to a
solid red light and gimbal beeps.
Trigger button
Temporary Lock
Function button
Double clicks
Double clicks
Single click
Function
Triple clicks
Reset to default
Press & Hold
Centers the camera away from the user on all 3 axes ( pan, tilt and roll)
and switches back to the default pan mode
Explanation
Function
Explanation
Pan mode
Follow mode
In the follow mode, the joystick is pushed to the left / right to push and
control the angle is -25 ° ~ + 25 °
Selfie mode
Camera pans around 180 ° so that its main camera faces user
Default mode
In the pan mode or follow mode, holding the trigger button temporarily
locks panning and tilting until released
Four clicks
Both the panning and tilting directions can be rotated
Motion Control mode
Five clicks
Initialization
After the initialization succeeds or fails, you can click the function button
to wake up the gimbal
Instructions of button
Note:the firmware upgrade may occur manual operation function and the actual product features do not match,
please get the latest version manual on the official website.
