Customer Helpline 0333 3201989
8
4
5
1
MIN
Speed
Material
8
b
a
A
B
C
D
E1
E2
F
G
H
I
4
5
1
MIN
Speed
Material
8
b
a
A
B
C
D
E1
E2
F
G
H
I
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended for sawing wood, plastic, metal and building materials while resting
firmly on the workpiece. It is suitable for straight and curved cuts.
1. ON/OFF SWITCH (SEE FIG A)
The switch is locked off to prevent accidental starting. Depress the lock off button (4)
then the on/off switch (5) and release the lock off button (4). The tool is working now. To
switch off, just release the on/off switch.
2. VARIABLE SPEED CONTROL (SEE FIG B, C)
Adjust the variable speed control (2) to increase or decrease the speed according to the
material, material thickness and blade specification to be used (also possible during no
load operation). (SEE FIG B)
For general guidance on speed selection, refer to Fig C.
Avoid prolonged use at very low speeds as this may damage your saw’s motor. If your
power tool becomes too hot, set the speed to maximum and run no load for 2-3 minutes
to cool the motor.
Operating Instructions
