background image

Limited Lifetime Warranty

   Fender  Musical  Instruments  Corporation  warrants
this Guild instrument to be free from defects in
materials and workmanship for as long as it is owned
by the original retail purchaser, except that pickups,
switches, jacks, controls, all other electronic
components, tuning machines, hardware, pickguards,
plated surfaces, cases and case hardware are
warranted for a period of one (1) year from the date
of original purchase.  This warranty applies only to
the original retail purchaser when this instrument is
purchased from an Authorized Guild Dealer and is
subject to the limitations set forth herein.
IMPORTANT: PLEASE RETAIN YOUR
ORIGINAL SALES RECEIPT, AS IT IS YOUR
PROOF OF PURCHASE VALIDATING THIS
LIMITED WARRANTY.

   Fender has established a network of independent
Authorized Service Centers for warranty service.
The Guild Dealer from whom you purchased your
instrument may also be authorized for warranty
service and should be the first point of contact when
service of any kind is required for your Guild
instrument. To receive warranty service, return the
complete instrument to an Authorized Fender Service
Center, with your sales receipt as proof of purchase,
during the applicable warranty period.

18

   Defective  components  that  qualify  for  coverage
under this warranty will be repaired or replaced (at
Fender's discretion) without charge. Remedies
beyond normal service repair of any Guild instrument
require both an evaluation and confirmation of the
defect and a direct recommendation to Fender from
an Authorized Fender Service Center for alternative
considerations.

   All  transportation,  insurance  and  freight  charges
associated with warranty service and repairs on Guild
instruments are the responsibility of the purchaser, as
is any service initiated for the purpose of customizing
setups or adjustments beyond factory specifications.
Initial standard setup and adjustment of the
instrument and its components at the time of
purchase are considered normal Dealer product
preparation, and are not covered by this warranty.

Limitations and exclusions

The following items are 

not

 covered by this warranty:

1. 

 

Fret wear, saddle wear, nut wear, strings and
batteries.

2. 

 

Setups, adjustments or routine maintenance of
any kind.

3. 

 

Damage to finishes or cracks, splitting, or
warpage of wood due to changes in temperature
or humidity, exposure to or contact with sun,
fire, moisture, perspiration, body salts and acids,
guitar straps, guitar stands/hangers made from
vinyl, plastic, rubber or other synthetic materials,
any other chemicals or non-Fender-approved
polishes.

4. 

 

Damage, corrosion or rusting of any hardware
components caused by humidity, salty air, or
exposure to the moisture, body salts and acids of
perspiration.

19

Summary of Contents for GUILD - REV B














Reviews: