Customer Helpline 0333 3201989
11
Operating Instructions
6. CHUCK ADJUSTMENT (SEE FIG. D)
To open the chuck jaws rotate the front section of the chuck. Insert the drill bit between
the chuck jaws and rotate the front section in the opposite direction. Ensure the drill
bit is in the center of the chuck jaws. Finally, firmly rotate the front chuck section in the
opposite directions. Your drill bit is now clamped in the chuck.
7. TORQUE ADJUSTMENT (SEE FIG. E)
(Screw driving force of your drill driver)
The torque is adjusted by rotating the torque adjustment ring. The torque is greater
when the torque adjustment ring is set on a higher setting. The torque is less when the
torque adjustment ring is set on a lower setting.
When drilling in masonry and concrete choose the hammer position .
When drilling in wood, metal, plastic and screwdriver choose the drill position .
Make the setting as follows:
1 - 4
for driving small screws
5 - 9
for driving screws into soft material
10 - 14
for driving screws into soft and hard material
15 - 21
for driving screws into hard wood
22
for driving larger screws
for heavy drilling
for drilling in masonry
8. USING THE SIGHT LIGHT
To turn on the light simply press the on/off switch. When you release the on/off switch,
the light will be off.
LED lighting increases visibility-great for dark or enclosed area.
D
E
