Customer Helpline
0333 3201989
7
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended for dry sanding of wood, plastic, filler and coated surfaces.
1. FITTING THE SANDING PAPER
SANDING PAPER WITH HOOK & LOOP SYSTEM
FIT THE SANDING PAPER (SEE FIG A)
The sanding papers are placed directly onto the base plate. The hole pattern in the
base plate and sanding paper must match. Then press the sanding paper onto the base
plate by hand. Firmly press the power tool with the sanding paper against a flat surface
and briefly switch the power tool on. This provides for good adhesion and prevents
premature wear.
Before placing on the sanding paper, free the base plate from dust/debris by lightly
tapping against it.
REMOVE THE SANDING PAPER
Simply remove the sanding paper directly.
Operating Instructions
A
Summary of Contents for 451/8309
Page 16: ......
