29
Not allowed manipulations:
It is not allowed to operate the device under conditions other than
specified in technical parameters. Devices are not designed for locations with chemically
aggressive environment. Temperature and humidity sensors must not be exposed to direct
contact with water or other liquids. It is not allowed to remove the sensor cover to avoid any
mechanical damage of the sensors.
Storage conditions:
temperature:
-40 to +60 °C (-40 to 140 °F)
relative humidity:
5 to 95 % RH (no condensation)
atmospheric pressure:
700 to 1100 hPa
Dimensions:
see dimensional drawings
Weight:
approximately:
440 g
470 g
530 g
340 g
360 g
Material of the case:
ABS
10.3. End of operation
Device itself (after its life) is necessary to liquidate ecologically!
10.4. Technical support and service
The adjustment procedure is described at file
,
Calibration manual.pdf
“ which is installed
commonly with the TSensor software.
Technical support and service is provided by distributor. For contact see warranty certificate. You
can use discussion forum at web address:
11.
Appendix A
Connection of external power relay
Coil data chart of external power relay:
nominal voltage : max 50V
nominal power: max 60VA
current:
max 2A
AR006709/1m probe
AR006709/2m probe
AR006709/4m probe
AR006708
AR006710
