![Guidecraft G97013 Assembly Instructions Download Page 4](http://html1.mh-extra.com/html/guidecraft/g97013/g97013_assembly-instructions_2278300004.webp)
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • (800) 524-3555 • www.guidecraft.com
Tipping furniture may injure young children. Use of
this tipping restraint hardware is highly
recommended.
This hardware, when properly installed, could
provide protection against the unexpected tipping
of furniture due to improper use.
WARNING: This product is only a deterrent. It is not a
substitute for proper adult supervision.
1. Attach one of the mounting brackets securely to
the back top edge of the furniture using the short
screw.
2. Find the stud in the wall and mark the location on
the wall for the mounting of the second bracket.
Mount the bracket with a 2" wood screw,
approximately 2" below the bracket mounted to the
edge of the furniture.
3. If a stud cannot be found purchase a "Hollow-Wall
Anchor Bolt" and attach the second bracket to the
wall using that bolt.
4. Place the furniture so the bracket on the back
edge is in line with the bracket on the wall.
5. Lace an end of the nylon restraint strap down
through each bracket. Bring both ends together and
slide the beaded end of the strap through the
keyhole shaped slot in the other end unit until it is
snug. Pull down on the beaded end until it snap
locks into the keyhole.
6. Check to make sure the strap is securely laced and
locked to the brackets.
Bookcase Anti-Tipping Bracket
page 4 of 4