•
Wake up the unit during PIR detection.
By pressing the [UP] or [DOWN] button 2 seconds to
wake up the unit inter preview.
3. Settings on Preview.
Set the functions during TFT in preview status.
3.1 Set the Capturing mode:
•
Power on the unit, press the [MENU] button to call
out the menu.
•
Press [UP] or [DN] to move the highlight to
CAPTURE MODES.
•
Then press the [CONFIRM] button to into the capture
setting.
•
Press the [UP] or [DN] button to select the capturing
and press the [CONFIRM] to confirm.
•
Press [MENU] again to exit the capturing mode
settings.
