l
11
Screen Layout (Continued)
In order to switch to Table View from one of the other views,
click on the Table View button in the top right of the display screen:
Single Sensor View
This is essentially a magnified form of the data in a single row of the Table View, with the
addition of downward-pointing chevrons to indicate a closing speed or upward-pointing
chevrons to indicate a separating speed. At very low speeds, only the top chevron is
coloured (red for closing and green for separating). At higher speeds, the second and third
chevrons are also coloured.
Single Sensor View can show the positional data in extra-large numerals:
Alternatively, by clicking on the Expand Spectrum button in the bottom right corner the
screen is split between positional data and the profile plot:
Click on the Collapse Spectrum button to maximise the positional data again.
In order to switch to Single Sensor View:
Either
Double-click on one of the radar beams on the Bird’s Eye View
Or
Double-click on one of the rows in Table View.
