Charging the earphones
Although your Bluetooth earphones come with a partially charged battery, it’s
recommended that you fully charge your earphones and the charging case before
the first use.
Note: Please remove the protective film between charging pins and the
earpieces in the case before you charge.
1. Put your earphones into the charging case. The charge cable should be
connected to the charge port of the charging case and to either a computer or
a dedicated USB charger.
2. When charging, the LED indicators on the earphones and the LED indicators
on the charging case will flash.
3. Once charging is complete, the LED indicators on the earphones will turn off,
and the LED indicators on the charging case will be turned on all the time.
Bluetooth pairing
1. When you take out the earphones from the charging case, press and hold the
Power/Function key for 2 seconds until the LED indicator starts flashing. This
means that the earphone is in pairing mode.
2. Turn on the Bluetooth on your device and search for the “Guess TWS
Earphone” on the device list. When you find it, tap to pair.
3. Once you successfully paired the earphones, the LED indicator will flash.
Once you successfully paired the earphones to a Bluetooth-enabled device,
the Guess earphones will automatically connect with that device every other time
they are near each other.
To turn off the Bluetooth earphones, either place each earpiece back into the
charging case or press the Power/Function button on either right or left earpiece for
about 4 seconds until the LED indicator flashes white.
