© 2020 GUDSEN All Rights Reserved.
3.
[iFocus]
Press and hold the power button in the
iFocus
for 3s. The indicator LED will flash white
(iFocus in boot mode, Fig 3).
4.
[Air 2 Gimbal]
Press and hold the
Air 2 Gimbal
’s joystick
in,
don‟t release the joystick. Then
press the power button
(hold in the joystick and press the power button at the same time).
“Boot
Mode” will be displayed on the Air 2 Gimbal‟s screen (Fig 4). Now the gimbal is in boot mode.
5. Launch the MOZA Master Software from your computer
, select “Air 2” from the device list.
6. The software will automatically open the upgrade interface. After the firmware has downloaded,
click the
“upgrade” button. Upgrading can take about 30 seconds.
7. During the upgrade, the
screen will display “Upgrading”. Once the upgrade is complete, the
scree
n will display “Upgrade Success”.